Sequoia LISST-HOLO, Руководство пользователя

Страница: 23 / 73

LISST-
HOLO User’s Guide
23
4.4 HOLO_Batch
– automated
batch processing of multiple
holograms
This section describes how to use the automated batch processing program,
HOLO_Batch.
Open the program by clicking the HOLO_Batch executable.
There are 5 main procedures to be performed before processing can
begin:

Select Reconstruction Parameters

Select Output Options

Select Particle Bin Size

Select Paths (Folders)

Select Files.
The HOLO_Batch is shipped with factory default settings for the
Reconstruction Parameters, and these should normally not be changed.
However, if necessary they can be changed by selecting Unlock
Reconstruction Parameters in the Options Menu.
The Change ROIs and Advanced buttons then become active.
Also the three input boxes for selection of the minimum and maximum
focal length, as well as the step size become active.