Sequoia LISST-HOLO, Руководство пользователя

Страница: 56 / 73

56 LISST-
HOLO User’s Guide
7 Handling, Cleaning, Maintenance and Storage
7.1 Handling When handling the instrument, at all times please remember that the LISST-HOLO is a high-
precision optical instrument.
Avoid mechanical shocks and impact to the housing, as this may cause misalignment of the optical
parts.
The instrument pressure housing should not be opened.
7.2 Cleaning The glass windows of the instrument can be scratched.
Do not use abrasive cleaners on glass or anodized surfaces.
When cleaning windows be careful not to drag and hard particles such as sand across the
windows.
Use glass cleaner or liquid dish soap to clean windows.
7.3 Maintenance Make sure that the windows are as clean as possible. The windows can be cleaned with Windex,
but often a mild, lukewarm, soap solution is the best for cleaning optical windows. Dip a finger in
the soapy solution and gently rub the windows. Rinse several times with clean, particle-free water.
The connectors and cables should be lubricated with 3M Silicone Spray or equivalent on a
frequent basis.
DO NOT use grease on the connectors. Grease may prevent the dummies or cables from mating
with the connectors and allow water to penetrate and cause corrosion or short circuit the
connector.
To preserve the file structure integrity on the internal drive, regular maintenance of the file system
is needed. Use the button ‘Schedule Maintenance’ on the Tools page to perform maintenance. You
should always perform this maintenance before deploying the instrument for a longer duration.
7.4 Storage The LISST-HOLO should be thoroughly cleaned with fresh water and dried out before storage.
Store in a clean dry place or inside the provided ship case.
Make sure the dummy plugs for the connectors are in place before storage.
The instrument should be disconnected from power when not in use.