SENSYS SBL10 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 69

SENSYS SBL10 Скачать руководство пользователя страница 39

+49 33631 59 650
[email protected]
w w w .sensys.de

Manual
SBL10

39 / 69

Version 1.27

Projects

7.4

All data are organized within projects. A project can contain multiple fields each of which can be
either a field for an area survey or a borehole field. By default the last project is opened when
MonSX is started. If this is not available or if there is no project at all, a message is displayed in the
welcome screen.

Creating a project

Tap “Project” (1) in the welcome screen which will lead you to a list of available projects. To create
a new project tap “New” (2), enter a name in the upcoming screen and tap “Create” (3). The project
is created and the program takes you back to the list of projects.

A recently created project is not automatically activated.

Activating a project

Tap on "Project" in the welcome screen to activate a project. Select the project which is to be
activated and tap "Activate". The active project will be marked with a green dot (4). By tapping
"Activate", the operator is directed to the corresponding project.

«
...
37
38
39
40
41
...
»

Содержание SBL10






































































Отзывы:

Нет отзывов