The SensiCloud Portal
78
The list is sorted first by site, enabling the administrative user to easily review a selected site's
patients. Within each site, the list is then sorted by physician and for each physician, the
patients are displayed according to the default sort described in 'Viewing the Patients List' on
page 77.
Searching the table is available by the following information types: Patient ID, Site, Physician,
Full Name and Device SN.
Tool tip
Pressing the icon available next to each patient ID will display the available contact
information.
Patient View
Pressing either the ‘View’ button or the patient ID of each patient on the list will show the
patient view screen. In this screen all patient measurements are shown in a tabular view,
without the actual results. Timestamp and the validity of each measurement performed by
the patient are shown in each line. Each measurement can have one of the following status
types:
1
OK – Valid measurement.
2
QF – Quality Feedback. Measurement of low quality for which a result could not been
calculated.
3
Stopped by user – Measurement that was stopped before it has been completed. Results
are not calculated.
4
Error – Measurement that was not successful due to a technical malfunction.
Figure 57: Patient View
