Seneca Z-PASS1, Руководство пользователя

Страница: 8 / 155

USER MANUAL – Z-PASS1/Z-PASS2
8
Z-PASS1-R01 and Z-PASS2-R01 are new versions of the Z-PASS1 and Z-PASS2 products, providing the following new
features:

the two available Ethernet ports can be configured as two fully separated network interfaces (“LAN” and
“WAN”), whereas in the older versions they could only work as ports of an Ethernet switch; the user can
choose if the two ports shall work in “LAN/WAN” mode or “Switch” mode, by means of a new configuration
parameter (“Ethernet Mode”);

there are 4 more LEDs, providing information about the “Ethernet Mode” and the VPN functionalities.
Z-PASS2-IO is a new version of the Z-PASS2 product, providing the following new features:

one digital input which can be used to disable remote connection to the device

one digital output which goes HIGH when the device is remotely accessed

one digital input which can also be used as a local alarm

one digital output which can also be used as a remote command

two configurable digital inputs/outputs

a new set of LEDs

COM1 RS232/RS485 mode set by software (configuration parameter), instead of HW DIP switch
Z-PASS1-IO is a new version of the Z-PASS1 product, providing the following new features:

one digital input which can be used to disable remote connection to the device

one digital output which goes HIGH when the device is remotely accessed

one digital output which can also be used as a remote command

one configurable digital input/output which can also be used as a local alarm

a new set of LEDs

COM1 RS232/RS485 mode set by software (configuration parameter), instead of HW DIP switch

a new penta-band 3G+ modem, which also features a GPS module
NOTE:
in the following chapters, the term “Z-PASS” will be used when describing features or characteristics that are available
in both Z-PASS1 and Z-PASS2 products.
4 Technical specifications
COMMUNICATION PORTS
RS 485 Baud rate: maximum 115 Kbps, minimum 200 bps
COM 4 (screw terminals 4-5-6)
COM 2 (screw terminals 1-2-3 or IDC10 connector)
COM 1 (removable 4 pin connector, as an alternative to RS232)
RS 232 Baud rate: maximum 115 Kbps, minimum 200 bps
COM 1 (removable 4 pin connector, as an alternative to RS485)