Seneca Z-PASS1, Руководство пользователя

Страница: 131 / 155

USER MANUAL – Z-PASS1/Z-PASS2
131

files containing the Modbus Gateway tags, if present;

web user pages, if present.
The configuration archive, once created and downloaded by means of the “SAVE” button can be uploaded
to the same or another device, in two ways:

by means of the “LOAD” button, in this page

by means of a USB pen
The procedure to load the configuration into the Z-PASS by means of a USB pen is the following:

copy the SW003900_conf.tar.gz file into the root folder of the USB pen;

switch off the Device;

insert the USB pen into the USB#1 port of the Z-PASS;

switch on the Z-PASS; the procedure will take some minutes to be completed; during this time, the
Z-PASS MUST NOT be switched off; during the procedure, the Z-PASS will be rebooted;

after the reboot, wait until you see the “RUN” LED blinking;

remove the USB pen;

the configuration has been applied to the Z-PASS.
The only care when you carry the configuration archive from a device to another one is that the two
devices should be the same product model; for example, it’s not safe to load the configuration archive
saved on a Z-PASS2-R01 into a Z-PASS2.
This page lets you load also the configuration archive as a zip file ( SW003900_conf.zip ).
Another useful feature available in this page is the one provided by the “Save Debug Logs / SAVE” button:
when you click on it, a file named
SW003900_logs.tar.gz is downloaded, which contains the debug logs
stored by the CPU during its operation.