Seneca Z-PASS1, Руководство пользователя

Страница: 49 / 155

USER MANUAL – Z-PASS1/Z-PASS2
49

General Configuration

Tag Configuration (when Gateway Mode is set to Modbus Gateway, see paragraph 18.4)

Mobile Configuration

Digital I/O Configuration (on Z-PASS1-IO, Z-PASS2-IO products)

Diagnostics
Furthermore, in this like in any other page, the following information are shown:

the page name

the Z-PASS FW version (along with the modem FW revision, for Z-PASS2
10
)

the Z-PASS MAC address; the modem IMEI, for Z-PASS2; the SIM IMSI, for Z-PASS2, when a SIM is
present

the network interface used for Internet Access (i.e.: “Ethernet” or “Mobile”)

the Modbus Bridge/Transparent Bridge/Modbus Gateway status (i.e.: “running” or “stopped”)

the Router status (i.e.: “running” or “disabled”)
The currently logged user (e.g.: “admin”) and the “Logout” link are also present, near the page name.
In this page, two buttons are available:

“RESET”, to perform Z-PASS reboot;

“FACTORY DEFAULT”, to reset Z-PASS to its factory state.
Probably, the first parameters you need to change when setting up a new Z-PASS device are those related
to its network configuration.
You can accomplish this in the “Network and Services” page, described in the following paragraph.
18.2 Network and Services
The parameters shown in this page slightly change, depending on the HW version of the product (Z-
PASS1/Z-PASS2 or Z-PASS1-R01/Z-PASS2-R01 or Z-PASS1-IO/Z-PASS2-IO) and, for new HW versions, on the
selected “Ethernet Mode”; this is shown in the following figures.
10
Also for Z-PASS1, when an external Z-MODEM-3G modem is connected.