Seneca S6001-RTU, Руководство пользователя

Страница: 173 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
173
interface (disabled when “DHCP
on WAN” is set to “ON”)
NETWORK/WAN Network Mask Network mask of the WAN
Ethernet interface (disabled when
“DHCP on WAN” is set to “ON”) 255.255.255.0
NETWORK/Default Gateway Default Gateway IP address
(disabled
when DHCP
functionality is enabled on any
interface).
When “Ethernet Mode” is set to
“LAN/WAN”, the Default Gateway
shall be in the WAN subnet.
192.168.100.1 , for Z-TWS4-
R0x
and Z-PASS2-S-R0x
(x=1,2)
192.168.90.1, for all other
products
NETWORK/DNS Mode Tells if the DNS Server shall be set
statically (value: “Static”) or
dinamically assigned by the DHCP
Server (value: “DHCP”) DHCP, for Z-TWS4-R0x and
Z-PASS2-S-R0x (x=1,2)
Static, for all other products
NETWORK/DNS Server DNS server IP address (disabled
when DHCP functionality is
enabled on any interface and DNS
Mode = DHCP) 192.168.100.1 , for Z-TWS4-
R0x
and Z-PASS2-S-R0x
(x=1,2)
192.168.90.1, for all other
products
WEB USER/Username Username to access the web
configuration site (limited access) User
WEB USER/Password Password to access the web
configuration site (limited access) user
Some notes about the “DHCP” parameters:

the “DHCP” parameter can be set to “ON” only if the “DHCP Server” parameter of the “Router
Configuration” page is set to “OFF”;

only the “DHCP on WAN” parameter can be set to “ON”.
You can change any of the above parameters; to apply the changes, press the “APPLY” button.
Please note that, after changing the Web User credentials, a new login will be required to access any page.
18.2.3 I/O View (S6001-RTU)
This page is identical to that shown for “administrator user” (see 18.1.12).