Seneca S6001-RTU, Руководство пользователя

Страница: 22 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
22
Signal COM2 COM4
GND 57 54
B 58 55
A 59 56
An RS232 serial port with full handshaking signals is available on DB9 male connector on the left side of
S6001-RTU. Use the CS-DB9F-DB9F cable
3
to connect RS232 devices.
Signals on DB9 connector are listed in the table below.
Pin Name Description IN/OUT
1 DCD Data carrier detect In
2 RXD Receive data In
3 TXD Transmit data Out
4 DTR Data terminal ready Out
5 SG Signal ground
6 DSR Data set ready In
7 RTS Request to send Out
8 CTS Clear to send In
9 RI Ring indicator In
An optional communication bus is available on removable screw terminals 60,61,62, for future extensions.
S6001-RTU has 1 USB port which is an USB HOST with connector type “A”, suitable to connect, for example,
a mass storage (e.g.: a USB pen) with maximum consumption of 300 mA @ 5 Vdc.
An Ethernet port is available on the left side of S6001-RTU on an RJ45 connector.
An SD card slot is available, near the optional bus screw terminals; SD cards with storage capacity up to 32
GB can be used.
A SIM card slot, with a push-push connector, is available; 3V mini SIM cards can be used.
Two SMA antenna connectors are available, for Main and Diversity antennas.
3
The
CS-DB9F-DB9F
cable is supplied on request.