Seneca S6001-RTU, Руководство пользователя

Страница: 65 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
65
functionality on the WAN Ethernet
interface
NETWORK/LAN IP Address IP address of the LAN Ethernet
interface 192.168.90.101
NETWORK/LAN Network Mask Network mask of the LAN Ethernet
interface 255.255.255.0
NETWORK/WAN IP Address IP address of the WAN Ethernet
interface (disabled when “DHCP on
WAN” is set to “ON”) 192.168.100.101
NETWORK/WAN Network Mask Network mask of the WAN
Ethernet interface (disabled when
“DHCP on WAN” is set to “ON”) 255.255.255.0
NETWORK/Default Gateway Default Gateway IP address
(disabled when DHCP functionality
is enabled on any interface).
When “Ethernet Mode” is set to
“LAN/WAN”, the Default Gateway
shall be in the WAN subnet.
192.168.100.1 , for Z-TWS4-R0x
and Z-PASS2-S-R0x (x=1,2)
192.168.90.1, for all other
products
NETWORK/DNS Mode Tells if the DNS Server shall be set
statically
(value: “Static”) or
dinamically assigned by the DHCP
Server (value: “DHCP”)
DHCP, for Z-TWS4-R0x and Z-
PASS2-S-R0x (x=1,2)
Static, for all other products
NETWORK/DNS Server DNS server IP address (disabled
when DHCP functionality is enabled
on any interface and DNS Mode =
DHCP) 192.168.100.1 , for Z-TWS4-R0x
and Z-PASS2-S-R0x (x=1,2)
192.168.90.1, for all other
products
NETWORK/IP Configuration from
Discovery Flag to enable/disable the
possibility of changing some of the
network configuration parameters
by means of the SDD application
(see chapter 6)
ON
WEB SERVER/Protocol Protocol used to access the web
pages:
HTTP/HTTPS, HTTPS, HTTP HTTP/HTTPS
WEB SERVER/HTTP Conf Port TCP port to access the
configuration pages, using HTTP
protocol.
Please note that if this parameter is
set to 80 (standard HTTP port), the
web user site won’t be available
anymore.
8080
Default URL for conf pages:
Errore. Riferimento a
collegamento ipertestuale non
valido.
WEB SERVER/HTTP User Port TCP port to access the user pages,
using HTTP protocol. 80
Default URL for user pages:
Errore. Riferimento a