DT-E 1.3: SUN PROTECTION SCREEN – VENETIAN BLINDS C80P and C80L
Issue 3 / April 2017 / EN
page 51 / 62
13.
Place guiding profile into the guide rail according to
imgs. 15 and 16 and fig. 15.
Img. 15
NOTE:
Special attention has to be paid during
placement of guiding profile so that no damage is
done to the guiding profile by slat pins.
Img. 16
Fig. 15
14.
Install guiding profile along full length of the guide rail
and install guide rail end caps. Profile upper part
should freely protrude from the guide rail in the
cassette.
NOTE:
Immobilise the ends of guiding profile with
silicone installation glue or silicone hot glue.
Img. 17
