DT-E 1.3: SUN PROTECTION SCREEN – VENETIAN BLINDS C80P and C80L
Issue 3 / April 2017 / EN
page 32 / 62
9.
Secure the cable tightener by tightening the conical
screw until a resistance is felt. Then use a Allen key
performing 1,25-1,5 full turn, bearing in mind to
leave some clearance required for correct tightener
functioning. Exceeding the scope mention above
results in damaging the screw socket or the wrench
ending.
Img. 10
10.
Loosen upper screw (locking movable part of the
tightener). Stop when the movable part pulls
out.
Img. 11
11.
Cut out the excess of the cable.
Img. 12
12.
Check the vertical levels of the cable. If
necessary, correct by moving the tightener in
the bracket.
Img. 13
