DT-E 1.3: SUN PROTECTION SCREEN – VENETIAN BLINDS C80P and C80L
Issue 3 / April 2017 / EN
page 42 / 62
8.
Install window frame guide rail to window or window
niche.
Img. 6
9.
Slide head rail with bundle into guide rails, so that the
label „strona od okna” faces the window. Incorrect
installation of the bundle will cause incorrect
operation of the blind. For easier installation the
bundle can be tilted, so that the pins are not
damaged.
Img. 7
10.
Lift the bundle and install head rail in brackets. Pay
attention so that the pins are introduced correctly
into the guide rail.
11.
Loosen screws of elastic brackets so that they are
easy to open.
12.
Install head rail in bracket and secure the previously
loosened screws.
Img. 8
13.
Place guiding profile inside the guide rail according to
img. 9 and fig. 8, profile should be aligned with the
upper Edge of guide rail.
Img. 9
NOTE:
Pay particular attention so that during guiding
profile installation it is not damaged by pins.
Fig. 8
