27
1.
2
Insert the clamp halves into the sheave house as
shown.
Squeeze the clamps together around the
stanchion.
3.
4.
Screw the clamp halves together using the
enclosed M6 screw and nut. Lightly tighten the
screw.
Align the sheave house in the desired direction
and tighten the M6 screw.
5.
6.
Thread the furling line and check the position.
Finally, lock the block in position...
…
using the enclosed self-tapping screws.
The Furlex kit contains 4 stanchion blocks to be fitted to a 25 mm (1”) stanchion or pulpit. The block
has a ball-and-socket joint and can be angled in any direction.
Fig. 6.4.a
Fig. 6.4.b
Fig. 6.4.c
Fig. 6.4.d
Fig. 6.4.e
Fig. 6.4.f
6.4 Fitting the stanchion blocks
