Sekotech ST-300 SPIDER, Руководство по эксплуатации, Страница: 15 / 68

OPERATING MANUAL
13
Fig.13
1 – mode unavailable (Electronic Switch not
connected)
2 – mode available (Electronic Switch connected)
3 – highlighted by the cursor
Fig.14 shows the Start Menu, with the Electronic
Switch connected to the Main Unit.
The numbers in Fig. 14 match those in Fig.12.
As is seen from the picture, with the Electronic Switch
connected to the Main Unit, all the items in the modes
list (6, Fig. 14) are available, and so are all the hotkeys
(7, Fig 14.).
To select a mode, move the cursor to the corresponding
list item using the and keys, and press
“
ENTER
”
.
If the Electronic Switch is connected to the Main
Unit, and hotkeys are active in the Start Menu (7,
Fig.14), use
“
F1
”
,
“
F2
”
,
“
F3
”
and
“
F4
”
for quick access
to the modes
“
LOW FREQUENCY AMPLIFIER
”
,
“
WIRED
RECEIVER
”
,
“
NONLINEAR JUNCTION DETECTOR
”
,
and
“
REFLECTOMETER
”
, respectively. The keyboard
hotkeys are located to the right of the display, next to
the corresponding hotkey legends on the screen. The
hotkey assignments change depending on the current
mode of operation.
2.3 SETTINGS
The
“
SETTINGS
”
mode is always available, regardless
of whether the Electronic Switch is connected to the
Main Unit or not. In this mode, the date, time, and
interface language can be set. To enter the settings,
select the menu item using the vertical arrow keys and
press
“
ENTER
”
.
The
“
SETTINGS
”
menu is shown in Fig. 15.
Fig.15
2.3.1 Date Setup
Set the date using the and keys.
Move the cursor to the “DATE
”
field and press
“
ENTER
”
.
The date setting menu will appear on the screen (Fig.16),
with the date shown in the format
“
DD-MM-YYYY
”
.
Using the and keys, move the cursor to the
“
DAY
”
field.
With the and keys, set the required value and
press
“
ENTER
”
to confirm.
Fig.16
Fig.14