Sekotech ST-300 SPIDER, Руководство по эксплуатации, Страница: 10 / 68

ST300 SPIDER
8
Рис. 7
1.3.3 Connecting the Electronic Switch to the ST300
Main Unit
The Electronic Switch is attached to the Main Unit
with the aid of a T-slot & lock mechanism, parts of which
are located on the body of the Main Unit, and on the
Electronic Switch. The two units are locked together by
rotating the lever.
The sequence of actions for joining the Electronic
Switch with the Main Unit is shown in Fig. 4.
1. Insert the guide of the Electronic Switch into the
T-slot on the Main Unit, with the lock arm in the vertical
(“open”) position. In the direction shown in the picture,
slide the guide all the way through the slot (Fig. 4, step
1).
2. Rotate the lock lever all the way (Fig. 4, step 2).
3. Insert the Electronic Switch connector into the
universal socket of the Main Unit (Fig. 4, step 3). Tighten
the connector nut without applying extra force.
Step 4 in Fig. 4 portrays the Main Unit correctly joined
with the Electronic Switch.
To disconnect and detach the Electronic Switch,
proceed in the reverse sequence.
Caution! Connect (disconnect) the Electronic
Switch only while the Main Unit is turned off!
1.3.4 Receiver of the Cable Locator
The Receiver unit is a functionally complete device and has power supply of its own (two 1.5V
“
ААА
”
batteries). On the front panel of the unit are control and display elements, and a socket for the contact
probe. On the back is the battery compartment lid. The unit has a speaker for sound notifications. The
appearance of the Receiver and the locations of its control and display elements are shown in Fig. 5.
Fig.4