Rostock Max Assembly Guide
40
16 – Assembling the Cheapskate Bearings
16.1 - For this step, you'll need the three Carriage Plates (P/N: 68343), the remaining CNC
machined aluminum hardware that was in the same bag with the U-Joints, the 608 bearings, and the
machined plastic bearing sleeves.
Figure 58 - Cheapskate Bearing Components
16.2 - Install the bearing sleeves on to the 608 bearings. Make sure to carefully de-burr the
plastic sleeves and remove any flashing from the rim of each one. Take care to not damage the outside
surface of the sleeves.
Figure 59 - Bearings with Acetal Sleeve Installed.
