Seemann XP5 Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 108

Seemann XP5 Скачать руководство пользователя страница 86

86

To Obtain Service

Take your XP 5 to an Authorized SEEMANN Dealer or send it to the nearest SEEMANN
Regional Distributor Facility.
To return your XP 5 to SEEMANN:

• Record all dive data in the Log and/or download the data in memory. All data will be

erased when it receives factory service.

• Package it using a protective cushioning material.
• Include a legible note stating specific reason for return, your name, address,

daytime phone number, serial number, and a copy of your original sales

receipt and

Warranty Registration Card.

• Send freight prepaid and insured using a traceable method to the nearest SEEMANN

Regional Service Facility, or to SEEMANN.

• Non-warranty service must also be prepaid. COD is not accepted.
• If you have any questions regarding service, contact the SEEMANN Customer

Service under E-mail [email protected].

BATTERY REPLACEMENT

The battery compartment should only be opened in a dry and clean environment with
extreme care taken to prevent the entrance of moisture or dust.
As an additional precautionary measure to prevent formation of moisture in the battery
compartment, it is recommended that the battery be changed in an environment equiva-
lent to the local outdoor temperature and humidity (e.g., do not change the battery in an
air conditioned environment then take it outside during a hot sunny day).

«
...
84
85
86
87
88
...
»

Содержание XP5













































































































Отзывы:

Нет отзывов