
69
To access the Time to Fly Countdown -
• press the Advance (Front) button
2 times
(while in Surface Mode)
• The unit will revert to Surface Mode after 2 minutes, unless the Advance (Front)
button is pressed to access the Desat Time Countdown.
• If a violation occurred during the dive a single dash ( - ) will appear instead of the
graphic FLY.
The Time to Fly counter (Fig. 65) is provided to assist you with deciding when enough
surface time has elapsed to fly (or travel to higher elevations). It begins counting
down 10 minutes after surfacing from a dive (after the Transition Period) displaying the
graphic
FLY
and a countdown that begins at 23:50 (hr:min) and counts down to 0:00
(hr:min).
Two hours after the last dive, the Time to Fly and Desaturation countdowns will be dis-
played alternately for 3 seconds each until they count down to 0:00 or another dive is
made. Access to other modes is gained by pressing Either button to return to Surface
Mode.
After a surface interval of 12 hours, you may choose
to fly (or travel to higher elevations), provided that
your dive profile(s) did not enter decompression. If
your diving involved decompression or a repetitive,
multi day profile, it is strongly recommended that you
wait a full 24 hours after your last dive to add a
greater degree of protection.
As you should be aware from your own training, the
longer you wait to fly (or travel to higher elevations)
after diving, the more you will reduce your exposure
to decompression sickness.
Fig. 65 - Time to Fly
Содержание XP5
