Seemann XP5 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 108

Seemann XP5 Скачать руководство пользователя страница 44

44

• There are few legitimate excuses for making unplanned Decompression dives, and

the consequences of this type of diving can be severe. By making an unplanned De-
compression dive without the necessary preparation and training, you will have
placed yourself in an unnecessarily dangerous situation. Allow a surface interval of
at least 24 hours before reentering the water in the event a dive requires emergency
decompression.

• By entering decompression, you automatically impose a “ceiling” above you which

you cannot immediately ascend beyond, denying you free access to the surface.

• Exiting the water with the Nitrogen Bar Graph in the red decompression zone greatly

increases the risk of decompression sickness, and may result in injury or death.

• Existing data for making planned decompression dives is extremely limited, and vir-

tually nonexistent for repetitive decompression diving

.

Decompression diving greatly

increases your risk of decompression sickness.

• Special training, equipment, and support are necessary for planned decompression

diving and diving deeper than the maximum recommended sport diving limit(s).

• Decompression diving will greatly increase your risk of decompression sickness.
• If your XP 5 stops working for any reason, it is important that you have

anticipated this possibility and are prepared for it. This is an important
reason for not pushing the no decompression and oxygen accumulation
limits, and a critical reason to avoid entering decompression.

• If you dive in situations where your trip would be ruined or your safety would be

jeopardized by losing the use of your XP 5, an analog or digital backup in-
strument system and use of standard air (or nitrox) tables is highly
recommended.

WARNINGS AND SAFETY RECOMMENDATIONS

«
...
42
43
44
45
46
...
»

Содержание XP5













































































































Отзывы:

Нет отзывов