Seemann XP5, Руководство пользователя, Страница: 70 / 108

70
To access the Time to Desaturate Countdown -
• press the Advance (Front) button 3 times (while in Surface Mode)
• The countdown starts 10 minutes after surfacing at 23:50 (hr:min) maximum and
counts down to 0:00 (hr:min). The Time to Desaturate Countdown displays the
graphic SAT and a counter (Fig. 66) that provides calculated time for tissue
desaturation (release of nitrogen loading) at sea level.
• If a violation occurred during the dive, Desaturation Time will not be displayed.
• The unit will revert to Surface Mode after 2 minutes, unless the Advance (Front)
button is pressed to access the Log Mode.
• Two hours after the last dive, the Time to Fly and Desaturation countdowns will be
displayed alternately for 3 seconds each until they count down to 0:00 or another
dive is made. Access to other modes is gained by to return to Surface Mode.
LOG MODE
Information from your latest 24 dives is stored in the Log
for viewing. The first dive of a new day (after midnight)
will be #1, then #2, etc. After 24 dives are accumulated,
each subsequent dive will overwrite the oldest dive in the
Log (i.e., the most recent dive deletes the oldest). Log in-
formation will not be lost when the battery is removed.
Dives are displayed in a reverse sequence that starts with
the dive most recently recorded back to the oldest of the
24 dives stored. Thus, your most recent dive will always
be the first shown in the sequence. Log screens are Date/
Time started, Nitrogen and Oxygen data.
Fig. 66 - Time to Desaturate