Seemann XP5 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 108

Seemann XP5 Скачать руководство пользователя страница 6

6

• The XP 5 is not intended for use by military or commercial divers.
• The XP 5 is intended for use by recreational divers who have successfully completed a

nationally recognized course in scuba diving, and diving with enriched nitrogen-oxygen
(nitrox) mixtures.

• It must not be used by untrained persons who may not have knowledge of the potential risks

and hazards of scuba diving, and diving with nitrox.

• You must obtain scuba certification, and certification in diving with nitrox before using

the XP 5, if you have not already done so.

• It is NOT for use by military and commercial divers.
• It should NOT be utilized for any competitive, or repetitive square wave or unplanned decom-

pression diving, it is intended solely for recreational use and multilevel diving.

• As with all underwater life support equipment, improper use or misuse of this product can

cause serious injury or death.

• Conduct your dives in such a manner so as to insure that you continuously check the

computer's proper function.

• If you do not fully understand how to use this dive computer, or if you have any questions,

you should seek instruction in its use from your authorized AERIS dealer before you utilize
this product.

• Never participate in sharing or swapping of a dive computer. Doing so may result in injury or

death.

• If you exceed certain limits, the XP 5 will not be able to tell you how to get safely back to

the surface. These situations exceed tested limits and can result in loss of some XP 5
functions for 24 hours after the dive in which a Violation occurred.

• The XP 5 enters Immediate Violation Mode when a situation totally exceeds its capacity to

predict an ascent procedure. These dives represent gross excursions into decompres-
sion that are beyond the boundaries and spirit of the XP 5 design. If you are following
these dive profiles, SEEMANN advises you not to use an XP 5 dive computer.

WARNINGS AND SAFETY RECOMMENDATIONS

«
...
4
5
6
7
8
...
»

Содержание XP5













































































































Отзывы:

Нет отзывов