
77
• Press and release the Select (Side) button to toggle be-
tween ON and OFF.
• Press and release the Advance (Front) button to accept
the setting and advance to DEMO: NI-O2 with CUR (or
NEW) flashing (Fig. 75).
When set for NEW, calculations are based on zero re-
sidual nitrogen and oxygen loading (a clean dive). When
set for CUR, calculations take into consideration any
calculated residual nitrogen and oxygen remaining from
previous 'actual' dives. Subsequent (repetitive)
Simulated dives will not take into consideration data from
previous Simulated dives.
• Press and release the Select (Side) button to toggle be-
tween NEW and CUR.
• Press and release the Advance (Front) button to accept
the setting and advance to Demo Surface Mode with the
DEMO graphic flashing (Fig. 76).
• Press and release the Advance (Front) button to ad-
vance to DEMO: FO2 with Air (or a numerical value)
flashing (Fig. 77).
• Press and release the Select (Side) button to advance
the FO2 setting from AIR to 21 then to 50, in steps of 1%.
• Press and release the Advance (Front) button to accept
the setting and revert to Demo Surface Mode with the
DEMO icon flashing.
Fig. 75 - Set Demo Calibration
Fig. 77 - Set Demo FO2
Fig. 76 - Demo Surface Mode
Содержание XP5
