Secheron UR46-81S Скачать руководство пользователя страница 23

Страница: 23 / 68

Document number: SG104148TEN

Revision: B01

Issue date: 20.8.2012

File: c-UR46-8S_inst_en.fm

C-23

UR46-81/82S

Installation

C.10

Low voltage connector

The connector: Harting 32 poles HAN 32EE.

Sécheron’s number for the mobile connector: SG104063R10100, including 30 pins of 1.5 mm

(SC202344) and 2 pins of 2.5 mm

(SC201259).

Note!

The mobile connector needs to be ordered separately.

Procedure

a) Insert the cables (5) into the pins (6) according to the following

08007

diagram, using the 09

99 000 0110 crimping tool (with locator) from Harting for HAN E

with wire gauges 0.5 -

4 mm

Note!

The number of the Harting’s pins removal tool is 09 99 000 0319.

b) Manually insert the pins (6) into the holder (7) and fix the holder (7) into the connector (1).

c) Check that the fixed (3) and mobile (1) connectors are not damaged.

d) Connect the mobile connector (1) into the fixed connector (3), ensuring the correct orienta-

tion (pin 1 must go into hole 1 according to the wiring diagram) and that the lock (4) is
correctly locked.

08006

Pins correspondence

08007

The closing coil is connected to pins 21 and 22 (or 31 and 32 for devices manufactured before
spring 2012), regardless of the polarity.

Note!

Up to five double-contact switches (5) can be inserted in the auxiliary housing (6).

1,2

15 13

11 9

7 5

3 1

Содержание UR46-81S





































































Результаты поиска

Содержание UR46-81S

Отзывы:

Secheron UR46-81S, Инструкция по эксплуатации, Страница: 23 / 68

Результаты поиска

Содержание UR46-81S

Отзывы: