Casting with RC
Use the RC controller to drop the sensor to the desired depth, the current depth of the sensor can be
read on the screen.
Be careful to not run the sensor into the ground as it can get stuck, the recommended maximum depth
is 90% the distance to the boZom of the body of water.
If the sensor is at the home posiDon but the on-screen display shows something different than 0.00, the
device can be armed to reset that value to 0.00 for more accurate and measurable casts. The system can
be disarmed by again clicking on the arming buZon.
Smart
Cast Dial
Seafloor Systems, Inc. | [email protected] | +1(530) 677-1019
Page
31
