Making an Automated Cast
Step 1
Arm the device by pressing the DISARMED buZon, the system will run the motor up to the home
posiDon and reset the posiDon value at that point to 0.
Choose whether the cast will be set in feet or meters.
Choose the depth the sensor will be cast to and confirm the value by clicking the “Set Depth” buZon.
Click the “CAST” buZon to begin the cast.
Once the cast has begun the system will again reset the “Current Depth” to zero. Next it will descend to
the desired depth, pause for two seconds, and then come back up and reset “Current Depth” a third
Dme. A[er this the system will disarm itself.
If the sensor hits the boZom of the body of water before the desired depth is reached the cast will stop
prematurely and return to the home posiDon.
Step
2
Step
3
Step
4
Seafloor Systems, Inc. | [email protected] | +1(530) 677-1019
Page
32
