2
Operation
Shoreside Setup
To setup the shoreside Wi-Fi Bridge plug in an ethernet to the MicroTik shoreside, and plug the other
end of the ethernet into the POE adapter. Attach the bullet connector to the POE and plug it into a
power source. Then, plug the POE ethernet adapter into the computer being used to remote into the
AutoNav Plus.
Now, setup the base computers network settings following the steps below:
1. Open Control Panel (Figure 2).
Figure 2
EchoBoat 160 G5
Quickstart Guide
Seafloor Systems, Inc. | [email protected] | +1(530) 677-1019
Page
16
