Calibrating Speed Controls for Motors
•
Start with the AutoNav on and armed. Keep thrusters turned off.
•
Press and hold Speed Controller settings button on motor you want to calibrate.
•
While still holding the Speed Controller setting button, turn on the thruster switch you
want to calibrate. When the LED starts blinking red you can release the settings button.
•
Tap the settings button to enter calibration mode.
•
Push the throttle joystick up all the way for full throttle and tap the settings button.
You will hear a chime.
•
Pull the throttle joystick back all the way for full reverse and tap the settings button.
You will hear a chime.
•
Put joystick back to Center. You will hear a final chime, and the LED on the speed
control will change to green.
•
You should have control of the throttle motors now.
Optional Long Range Module
•
Install R9M with antenna on the back side of the remote.
•
Plug in external 2s battery to the R9M.
Seafloor Systems, Inc. | [email protected] | +1(530) 677-1019
Page
11
*More in depth instructions on page 46*
