Step 4
Once nuts are removed, the thruster plate and thruster will lift off the boat and expose the
m3x6 allen screws that hold the thruster plate to the thruster. Remove the thruster plate
from the thruster by removing those four screws with 2mm allen key. If you are replacing the
thruster skip to step 10.
Remove the four #2 Phillips screws along the outer edge of the thruster.
Step 3
Step 5
Pull the base and propeller out of the nozzle
and tail cone.
Remove the 2mm allen screw that holds the
propeller to the motor assembly.
Step 6
Page
4
7
Seafloor Systems, Inc. | [email protected] | +1(530) 677-1019
