DOCS-001 Manual, SeaBotix Inc. Users, 150 – 200 Series - Rev B – 27 Jan 10 -
Page 38 of 64
Step 3
Remove Sonar and Tracking if installed. This is
accomplished by disconnecting the data cables from the
head(s) and removing the LBV handle.
TO005 required.
Step 4
Place the LBV on its side.
Warning:
When placing the LBV on it’s side care and attention must
be paid to any cabling exiting the camera chassis. Placing stress on
these cables can damage the cable and or the water tight integrity of
the LBV itself.
Step 5
Remove the four M6 x button head screws securing the
bumper frame to the shell.
TO005 required.
Step 6
Fasteners removed:
1 ea Lead Trim Weight if installed.
2 ea M4 X 20 Button Head Screws
2 ea M4 X 25 Button Head Screws
Step 7
Remove the two M5 x 12 button head screws securing
the crossbar to the bumper frame.
Step 8
Lift off the bumper frame.
Step 9
Turn the LBV over to the opposite side.
