DOCS-001 Manual, SeaBotix Inc. Users, 150 – 200 Series - Rev B – 27 Jan 10 -
Page 47 of 64
Surface Power Supply (SPS) or ICC
From Left: Red power LED, 10
amp input breaker, amber LED, Main
power switch, input power cable, Flash
& Sonar/Tracking Port, Video Output
connector (covered), Operator Control
Console Port, tether connection.
Operator Control Unit (OCU)
Note the two LED’s above the Auto
Head and depth buttons, as well as the
LED above the red power button.
Tether, LBV-End
Note Pins 1, 2 & 3
5.4
Proper Operating Conditions
Please note: Whenever the term ‘normal’ is used in the Troubleshooting Guide, it refers to the
proper operating condition of that device or indicator.
After correctly connecting all the LBV components, indications of the normal operating condition of
the LBV system is as follows:
-Upon energizing the SPS main power switch, the SPS red and amber LEDs are continuously lit and
do not flash. The LBV is not energized and the LBV does not output video.
-Upon pressing the OCU power button, a soft click can be heard from the SPS/ICC. The red LED
remains lit and the SPS amber LED begins a continuous cycle of being lit and unlit for ~2 seconds in
each state. The OCU power LED is continuously lit and the OCU Auto Head and Auto Depth LED’s
remain unlit.
