DOCS-001 Manual, SeaBotix Inc. Users, 150 – 200 Series - Rev B – 27 Jan 10 -
Page 29 of 64
4. User Text
a. Pressing the 4 key will take you to the next screen for inputting user
text.
To input user text, simply press the appropriate key on the keypad to
cycle through the letters until you find the first letter desired. Once the
letter is shown on the screen, press the ENT key to move to the next
character. Repeat this process until all characters are displayed as
desired. Pressing the “0” key twice plus ENT will insert a space. Note
the space will not be apparent until you enter the next character.
Press the * when finished.
Example: To enter LBV 150 as user text:
1. Press 5 three (3) times until the L is shown.
2. Press ENT
3. Press 2 two (2) times until the B is shown.
4. Press ENT
5. Press 8 three (3) times until the V is shown.
6. Press 0 two (2) times.
7. Press ENT
8. Press 1 one (1) time.
9. Press ENT
10. Press 5 four (4) times.
11. Press ENT
12. Press 0 one (1) time.
13. Press *
14. Press PRGM
5. Reset to Defaults
a. Pressing the 5 key will reset the entire LBV to factory settings.
2.3.4
Calibrate
Menu
1. Tilt Indicator
a. Pressing the 1 key will allow you to calibrate the camera angle
indicator on the Video Overlay.
b. Once pressed the LBV will automatically rotate the camera to the
bottom position and back to the center.
NOTE
: Do not attempt to calibrate the tilt function if the tilt controls have been
reversed in the options menu. Return them to normal, calibrate the tilt, and
then if desired set them to reverse after completion.
