DOCS-001 Manual, SeaBotix Inc. Users, 150 – 200 Series - Rev B – 27 Jan 10 -
Page 61 of 64
Limitations and Exclusions
This limited warranty does not cover:
• Damage caused by improper use, improper maintenance, incorrect reassembly or
accidental damage
• Items subject to normal wear including but not limited to view ports, outer shells,
protective bumper frames, tethers and other cables unless found to be defective in
workmanship or materials
• Modification made to the GOODS without prior written authorization from SeaBotix Inc
• Damage due to incorrect power connection as described in the User’s Manual
• Damage or failure that is caused during shipment or by acts of God, acts of war, or
other such similar or dissimilar occurrences beyond either party’s control.
SeaBotix makes no warranties regarding third-party products. However, SeaBotix shall
assign to OWNER any transferable manufacturers' warranties covering third-party
products delivered with the GOODS. OWNER shall bear the responsibility of completing
and returning manufacturers' warranty registration cards for such third-party warranties.
SeaBotix will lend assistance to OWNER, when required, to facilitate the performance of
third-party warranties but bears no responsibility for such third party’s performance.
THE REMEDIES SET FORTH HEREIN ARE OWNER’S EXCLUSIVE REMEDIES FOR
BREACH OF WARRANTY.
Shipping and Return Material Authorization (RMA) Forms
Immediately upon identifying a problem which you believe to be subject to this limited
warranty, you must request warranty service by contacting SeaBotix or your local
distributor.
All requests for warranty service must be authorized by SeaBotix prior to return of the
GOODS. You must work with our technical support staff to help diagnose the problem.
This may include performing routine diagnostic procedures. The technician can
determine if the problem can be resolved over the telephone or if return for repair is
required. Upon determining that the product may have a defect under the terms of the
limited warranty, and that return to the repair facility is required, SeaBotix will issue an
Return Merchandise Authorization (RMA) form which you must complete and return to
SeaBotix. Upon receipt of the completed RMA form, SeaBotix will provide you with the
following information:
• An RMA number
• The address to which your product must be sent
