background image

 

DOCS-001 Manual, SeaBotix Inc. Users, 150 – 200 Series - Rev B – 27 Jan 10 - 

Page 33 of 64 

 
 

Section 3:     

Operating the LBV 

 

3.1  

Operating 

Environment 

 
As simple as the LBV is to operate there are several points to keep track of.  To help 
focus on the task, a comfortable operating environment will greatly help.   Find a 
suitable area where you can stay relaxed.  Take the time to route the cabling in a way 
as to stay untangled and out of danger of tripping someone.  Place the monitor at eye 
level, on a stable flat surface when possible, which will aid in reduced neck fatigue.  
Find a comfortable place to sit.  Stay relaxed. 
 

3.2  

Deployment 

 
The LBV can be deployed in several ways.  The convenient handle located at the top of 
the LBV is the obvious way.  Simply lift the LBV into the water and begin deploying out 
the tether.  The LBV is fitted with a protective bumper frame; use any portion of the 
frame as a handle.  Do not drop the LBV into the water.  

 

NOTE:

 When deploying the LBV, ensure that there is a clear path for the 

tether to deploy out. 
 

3.3  

Tether 

 
A key feature to the LBV performance is the small diameter tether.  By reducing the size 
of the tether, drag is greatly reduced thus enabling the LBV to operate in strong currents 
or with long lengths of cable in the water.  Because of its small size and light weight, 
managing the tether is simple. 
 

ƒ

  The tether is neutrally buoyant in fresh water and slightly positively buoyant in 

sea water. 

ƒ

  Coil the tether in a figure eight pattern.  By coiling the tether in a figure eight 

pattern, this will help with deployment and recovery of the LBV. 

ƒ

  Pay attention to the turns counter on the Video Overlay to keep the tether as 

straight as possible. 

ƒ

  Prior to connecting the underwater connector to the LBV, put a small amount of 

silicone grease (GLA001 which is supplied with your order) on your fingers and 
place the grease on the male pins.  This will help with installation and assist in 
protection from the water and corrosion. 

 

3.4  

Piloting 

 
The LBV has been designed for simple operation.  Once you have a basic 
understanding of the operator control unit and features of the LBV, you will quickly 
discover how easy the operation of the LBV can be.  Listed below are some features of 
the LBV and how they aid operation. 
 

Содержание LBV150

































































Отзывы: