manualshive.com logo in svg

Sea-Bird Scientific Deep SeapHOx V2, Руководство пользователя

Поделиться
Скачать
Sea-Bird Scientific Deep SeapHOx V2 Скачать руководство пользователя страница 52

AF24173 ANTI-FOULANT DEVICE

FOR USE ONLY WITH SEA-BIRD ELECTRONICS' CONDUCTIVITY SENSORS TO
CONTROL THE GROWTH OF AQUATIC ORGANISMS WITHIN ELECTRONIC
CONDUCTIVITY SENSORS.
ACTIVE INGREDIENT: Bis(tributyltin) oxide . . . . . 52.1%
OTHER INGREDIENTS: . . . . . . . . . . . . . . . . . . . . 47.9%
TOTAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100.0%

DANGER

See Precautionary Statements for additional information.

FIRST AID

If in eyes

•

Hold the eye open and rinse slowly and gently with water for 15–20 minutes.

•

Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.

•

Call a poison control center or doctor for treatment advice.

If on skin or clothing

•

Take off contaminated clothing.

•

Rinse skin immediately with plenty of water for 15–20 minutes.

•

Call a poison control center or doctor for treatment advice.

If swallowed

•

Call poison control center or doctor immediately for treatment advice.

•

Have person drink several glasses of water.

•

Do not induce vomiting.

•

Do not give anything by mouth to an unconscious person.

HOT LINE NUMBER

Note to Physician

Probable mucosal damage may contraindicate the use of gastric lavage.

Have the product container or label with you when calling a poison control center or doctor, or going for treatment. For further
information, call National Pesticide Telecommunications Network (NPTN) at 1-800-858-7378.

Net contents: Two anti-foulant devices
Sea-Bird Electronics, Inc.
13431 NE 20

th

 St.

Bellevue, WA 98005 
EPA Registration No. 74489-1 
EPA Establishment No. 74489-WA-1 

PRECAUTIONARY STATEMENTS
HAZARD TO HUMANS AND DOMESTIC ANIMALS
Danger:
Corrosive

—Causes irreversible eye damage and skin burns. May be fatal if swallowed or

absorbed through the skin. Do not get in eyes, on skin, or on clothing. Wash thoroughly
with soap and water after handling and before eating, drinking, chewing gum, using
tobacco, or using the toilet. Remove and wash contaminated clothing before reuse.

PERSONAL PROTECTIVE EQUIPMENT

Users must wear: protective gloves (rubber or latex), goggles or other eye protection,
long-sleeved shirt, long pants, and shoes plus socks.

General information

50

Содержание Deep SeapHOx V2

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды