Sea-Bird Scientific Deep SeapHOx V2, Руководство пользователя

Страница: 48 / 56

• "Default Data Directory" lets the user enter the location on the PC in which to save
data from the sensor. If there is a check in the "Prompt at startup" box, the user can
change the directory in which the data is stored every time the software starts.
9.2.2 Display tab
Note: The software operates faster if the user selects less data and only one or two graphs.
Data that is collected by the sensor shows in the user-selected graphs in the
Performance Optimization Settings area of the
Display tab.
• RS232 only: "Enable Real Time Display"—Put a check in this box to see the data as
it is collected in either the software, or if deployed, a terminal program.
• "Enable Time Series Graph"—Put a check in this box to see user-selected data.
Remove the check in the box to so that the graph is disabled and the data does not
show.
• SUNA only: "Enable Spectra Graph"—Put a check in this box to see both dark and
light data in raw counts. Refer to
Monitor spectra for details.
• SUNA only: "Enable Total Absorbance Graph"—Put a check in this box to see the
calculated absorbance. Refer to
Monitor absorbance for details.
Time Series Settings—The default is a check in the box for continuous data collection
that is not limited to a specified amount of time. Remove the check in the box to enable
the "Time Axis Range Limit" of 60 minutes (default value). Only the most recent hour of
data will show in the
Time Series Graph . The user-selectable range is 1–1440 minutes.
Software reference
46