Maintenance
07.00 | GSM-P | Assembly and Operating Manual | en | 389104
49
7.11 Servicing and assembling the product
Maintenance
• Clean all parts thoroughly and check for damage and wear.
• Treat all greased areas with lubricant.
Grease/greasing areas
[
}
39]
• Oil or grease bare external steel parts.
• Replace all wear parts / seals.
– Position of the wearing parts
Drawings
[
}
50]
– Seal kit
Seal kit
[
}
53]
Assembly
Assembly takes place in the opposite order to disassembly. Ob-
serve the following:
• Unless otherwise specified, secure all screws and nuts with Loc-
tite no. 243 and tighten with the appropriate tightening
torque.
Screw tightening torques
[
}
40]