manualshive.com logo in svg

SCHUNK GSM-P, Сборка и руководство по эксплуатации, Страница: 4 / 60

Поделиться
Скачать
SCHUNK GSM-P Скачать руководство пользователя страница 4

Table of contents

4

07.00 | GSM-P | Assembly and Operating Manual | en | 389104

5.1

Setting the speed................................................................................................  34

5.2

Adjustment of the shock absorber stroke ..........................................................  35

5.3

Restart after long standstill ................................................................................  36

6

Troubleshooting ..................................................................................................... 37

6.1

Product does not achieve the opening and closing times ..................................  37

6.2

Swivel movement is not executed immediately.................................................  37

7

Maintenance .......................................................................................................... 38

7.1

Notes ..................................................................................................................  38

7.2

Maintenance and care intervals .........................................................................  38

7.3

Grease/greasing areas........................................................................................  39

7.4

Screw tightening torques ...................................................................................  40

7.5

Disassembly/assembly of the unit in the basic modules....................................  40

7.6

Disassembly/assembly of the gripping module..................................................  41
7.6.1

Version without maintenance of gripping force unit GSM-P.................. 41

7.6.2

Version with maintenance of gripping force unit................................... 42

7.6.3

Mounting orientation of the magnets, item 120.................................... 44

7.7

Disassembly/assembly of the DKM feed-through compact module (item 40) .. 44

7.8

Replacing a shock absorber for S variants ..........................................................  46

7.9

Replacing an elastomer for E variants ................................................................  47

7.10 Disassembly/assembly of the FAN rotor drive (50) ............................................  48
7.11 Servicing and assembling the product................................................................  49

8

Drawings................................................................................................................. 50

8.1

Assembly drawing of the basic module..............................................................  50

8.2

Assembly drawing of the DKM and FAN modules ..............................................  51

8.3

Assembly drawing of the gripping modules .......................................................  52

9

Seal kit.................................................................................................................... 53

9.1

Sealing kit lists for the FAN 40 - 64 rotor drive...................................................  53

9.2

Sealing kit lists for the P-32 - P-64 gripping modules .........................................  54

10 Accessory pack rotational speed rotor FAN ............................................................. 56

11 Translation of original declaration of incorporation ................................................ 57

12 Annex to Declaration of Incorporation .................................................................... 58

Содержание GSM-P





























































Отзывы:

Нет отзывов