Maintenance
40
07.00 | GSM-P | Assembly and Operating Manual | en | 389104
7.4 Screw tightening torques
Position of the item numbers
Drawings
[
}
50]
Screw tightening torques GSM-P
GSM-P
Item 110
Item 111
Item 112
Item 115
32
2.7 Nm
2.7 Nm
0.7 Nm
5.8 Nm
40
5.8 Nm
5.8 Nm
0.7 Nm
5.8 Nm
50
5.8 Nm
12 Nm
0.7 Nm
5.8 Nm
64
6 Nm
12 Nm
1.3 Nm
12 Nm
DKM screw tightening torques
Rotary gripping
module
Item 121/124 Item 133 Item 140 Item 231 Item 232
GSM-P-32/-P-40
Basic size
40x40
1.2 Nm
-
2 Nm
6 Nm
3 Nm
GSM-P-50/-P-64
Basic size
64x64
2.0 Nm
-
4 Nm
10 Nm
6 Nm
Tightening torques for screws FAN
Rotor drive
Item 101
Item 104
FAN 40
1.3 Nm
FAN 64
3.1 Nm
7.5 Disassembly/assembly of the unit in the basic modules
Position of the item numbers
Drawings
[
}
50]
Disassembly
Ø
Remove the compressed air lines.
Ø
Turn the gripping module (GSM) into the middle position.
Ø
Remove the screws (104) and pull the DKM feed-through com-
pact module (40) off the FAN rotor drive (50).
Assembly
Ø
Turn the rectangular section of the rotor drive (53) with the
longer side towards the center of the air connections A and B.
Ø
Turn the DKM back stop 1 (81) with the magnet towards the 90°
position, i.e. with the 090 version, one magnet has to point to-
wards the 90° position and the other one towards the 180° posi-
tion.
Ø
Put the DKM feed-through compact module (40) on the FAN ro-
tor drive (50) and secure the two modules with the screws
(104). Observe the permissible tightening torques
Screw tight-
ening torques
[
}
40].