37
5. Accessories.
5.3 Push bar
The push bar is height adjustable and
equipped with an integrated anti-rotation
lock. In addition, it can be dismantled. In or-
der to adjust the height, please loosen the
clamp (
A
) and bring the push handle into the
required height. In order to remove the entire
push bar, please loosen the clamp (
B
). Please
ensure on insertion that the push bar is inser-
ted up to its limit into the push handle holder,
and cannot be rotated.
Use the push bar only to guide the tricycle! The
push bar is NOT suitable for moving, lifting or tilting the tricycle!
5.4 Brake for accompanying escorts
The brake for the accompanying escort (including motor shutdown and
usable only in conjunction with the push bar) allows an escort to slow down
the tricycle during use. By pressing the brake, the e-drive motor is switched
off. The function of the lever is similar to a normal brake lever.
Always ensure that the brake or the brake blocks function correctly and have
been adjusted (see Point 4.2.1).
5.5 Handlebar lock limiter
The handlebar lock limiter can be adjusted
to determine the direction of travel. In order
to adjust the handlebar lock limiter, please
loosen all grub screws (
C
) and bring the li-
miter (
D
) into the required position. You can
determine the direction by moving both limi-
ters (
D
) towards the handlebar stop (
E
) and
tightening them.
If possible please leave the settings on the handlebar lock limiter as set at the
factory!
A
B
C
D
E
