30
3. E-drive.
3.3.9 Switching the lighting on and off
This function makes it possible to ope-
rate the lighting with the battery pack
of the drive system.
To switch on the lighting, keep the but-
ton (
A
) pressed. The lighting will be swit-
ched on after approx. one hour. This fun-
ction is indicated by a lamp symbol (
B
)
in the display.
Keep button (
A
) pressed down against
to switch the light off. The lighting will
be switched off again after approx. one
hour.
3.3.10 Registering a PIN
If the user has registered a PIN, the dri-
ve system will first ask for this PIN after
switching on. The system is only ready
to operate after full and correct entry of
this PIN.
For information
In the delivery state, no PIN is defined and the system is ready for use im-
mediately after switching on.
The setting mode is entered by simultaneously pressing the two buttons
(
A + C
) while the drive system is switched on. The display first shows the
display for entering a PIN.
The entry mode is accessed by pressing the MODE (
D
) button. Four digits
are shown, of which the first one flashes.
By pressing one of the two buttons (
A + C
), the respective position is in-
creased or decreased by one number. The preferred number is confirmed
by pressing the MODE (
D
) button and the next digit starts flashing.
Simultaneously press both buttons (
A + C
) when all digits have been de-
fined. This saves the registered PIN.
Then switch the drive system off. After switching on again and every time
the drive system is switched on, the PIN is now requested. The PIN can be
changed at any time when the drive system is switched on.
B
A
D
C
