25
3. E-drive.
3.3.1 Switch on
Press the MODE (
A
) button for at least 3 se-
conds until the display becomes active. Then
release the button again. Pushing and hol-
ding the button serves to protect against
unintentional switching on. The system is now
ready to ride.
Caution
When switching on, the pedals must not be loaded so that the drive is not
unintentionally taken into operation! Please proceed as follows:
• First get on the tricycle and put both feet on the ground.
• Then switch the drive system on.
• Now you can set off.
3.3.2 Switch off
Press the MODE (
A
) button for at least 3 seconds until the display goes out.
Then release the button again. The drive system is now switched off.
For information
The system switches itself off if no riding activity has taken place for more
than approx. 10 minutes. Before further use, the drive system must then be
switched on again by pressing the MODE (
A
) button.
3.3.3 Start-up assistance
The start-up assistance is an optional function of the drive system. It al-
lows starting with electrical assistance without pedaling up to a speed of
max. 6 km/h.
Using the button
To activate the start-up assistance, press the arrow up (
B
) button. Motor
assistance is started again after approx. one second. To end the assistan-
ce, release the button (
B
).
Using the twist grip
To activate the start-up assistance, turn the twist grip (
C
) towards the
body. Motor assistance starts immediately. To stop the assistance, release
the twist grip (
C
).
A
B
C
