36
5. Accessories.
5.1 Dynamic back and pelvic guide pelotte pads
All back and pelvic guide pelotte pads can
only be used in connection with a holding
bracket (see
Point 5.6
). For depth adjustment
of the pelotte pad holding bracket, please
loosen the screws (
A
) on the right and left-
hand sides of the support under the saddle,
and bring the holding bracket into the requi-
red position. The angular adjustment of the
holding bracket takes place after loosening
the screw (
B
) on the support. The pelotte
pads are adjusted in height after loosening
the screw (
C
) on the respective support.
Only use original accessories, otherwise the gu-
arantee will be lost.
5.1.1 Width adjustable back and pelvic gui-
de pelotte pads
For information on the height, angle and
depth adjustment of the back and pelvic
guide pelotte pads, see
Point 5.1
. The width
adjustable back and pelvic guide pelotte
pads can be adjusted in width. To do this,
loosen the screws (
D
) on the rear of the back
or pelvic guide pelotte pads and bring them
into the required position.
5.2 Headrest
The headrest can only be used in connecti-
on with a holding bracket (see
Point 5.6
) and
is adjustable in height. In order to adjust the
height, loosen the screw (
E
) and bring the
headrest into the required position
After each adjustment, please retighten all
screw connections!
C
B
A
E
D
