Schimpf 00-10/30 STEP Скачать руководство пользователя страница 9

Страница: 9 / 74

Device safety

by Antriebs- & Regeltechnik Schimpf GmbH

Device safety

•

The actuating drives are high-quality products manufactured according

to recognised technical rules, and they left the factory in a safe condition.

•

In order to keep the actuating drives in a safe condition, it is imperative

that installers/users strictly adhere to the manufacturer’s instructions in
this documentation and have the appropriate professional qualifications.

•

The actuating drives may only be used for their intended purpose!

•

The actuating drives may only be used when securely fixed on the

relevant fitting!

•

The actuating drives may only be operated in accordance with the values

specified in the technical specifications!

•

The actuating drives must not be installed, commissioned or adjusted on

damaged supply lines or flanged system parts! The same requirements
apply to damaged actuating drives!

•

The device must not be disposed of with household waste. Please use

the return and collection systems available to you to return the old
device.

Содержание 00-10/30 STEP











































































Результаты поиска

Содержание 00-10/30 STEP

Отзывы:

Бренды по названию

Популярные бренды

Schimpf 00-10/30 STEP, Руководство по эксплуатации

Результаты поиска

Содержание 00-10/30 STEP

Отзывы:

Бренды по названию

Популярные бренды