Schilling Megalight, Руководство пользователя

Страница: 64 / 65

Schilling Marking Systems GmbH
In Grubenäcker 1 DE-78532 Tuttlingen
+49 (0)7461 9472-0 +49 (0)7461 9472-20
info@schilling-marking.de
www.schilling-marking.de
MegaLight Installation
Technical modifications reserved 64 Edition 2004
10) A manual laser
emergency command
must be available,
separate from the line
switch.
Install a red mushroom
head button with
appropriate laser
emergency labeling
(CEI symbol) with
priority over all other
commands.
Activation of the mushroom
head button with forced
opening contacts must stop
the radiation immediately
which must not be able to
reactivate unless the restart
procedure is carried out.
N.B.: if the laser device is
installed in a more complex
system, e.g. a robot or
engraving line, which also
have a mushroom head
button, two emergency
circuits with different
functions are not allowed!
Therefore it is necessary to
create a single emergency
circuit which stops both the
machine and laser, the
second mushroom head on
the laser will identify the
secondary circuit which only
acts as a laser emergency.
11) All the warning
labels required for
Class IV must be
present on the source.
Install warning labels
no. 1-no. 2-no. 3-no. 4
See “Warning labels”.
The labels are positioned
and have the form,
dimensions and description
corresponding to the
Standard provisions.
12) All the warning
labels required for
class I must be present
on the system.
Install the “Laser class
I” warning labels.
No other label is necessary if
label no. 1 is usually put on.
13) A warning label
needs to be present on
the interlocking panels,
doors
Install warning label
no. 6
See “Warning labels”.
The labels are positioned
and have the form,
dimensions and description
corresponding to the
Standard provisions.
14) Parts containing
dangerous voltage
must have appropriate
warning plates
regarding electrical
risks.
Install warning labels
no. 9-No. 10
See “Warning labels”.
The labels are positioned
and have the form,
dimensions and description
corresponding to the
Standard provisions.
15) The electrical
cabinet must have a
plate identifying the
device.
Install warning label
no. 13
See “Warning labels”.
The labels are positioned
and have the form,
dimensions and description
corresponding to the
Standard provisions.
Note 1: If the provision is not applicable (NA) objective data must support its actual non-
applicability.
Note 2: The labels must be in the Manufacturer’s language, if the product is not intended for
export, otherwise, if intended for export, EVEN TEMPORARILY, it must be in the country of
destination in the European Community.