Schambeck SFD GmbH
Refractive Index Detector RI2000
SFD101.01.3x.EN / 2014-07-10
33
http://www.schambeck-sfd.com
14.8
M
ARKERS
To modify settings concerning marker signals press the
MENU
button until the following
status line is displayed:
The function UseMarker can be used to send a marker signal to the recorder output. Is the
parameter UseMarker set to NONE no marker signal can be sent to the recorder. Pressing
one of the buttons
ArrowUp
(
▲
) or ArrowDown (
▼
) changes the setting to ARROW
.
To accept this setting press the
ENTER
button. Is this function activated like this a marker
signal can be sent to the recorder output each time the button
ArrowUp
(
▲
) is pressed.
The height of the marker signal is set to
1/8 of the selected recorder signal range. When
the marker signal is sent to the detector you will hear an acoustic signal.
