Schambeck SFD GmbH
Refractive Index Detector RI2000
SFD101.01.3x.EN / 2014-07-10
16
http://www.schambeck-sfd.com
10.5 O
PTICAL
A
DJUST
The two black caps on the back side of the detector cover holes in the detector’s housing.
If needed the optical system of the detector can be adjusted using the hex-wrench which
came with the instrument. To adjust the mirror, remove these caps and turn the adjustment
screws
carefully
.
10.6 D
RAIN
In case of a leakage inside the housing mobile phase can leave the housing using the tube.
You might connect an additional waste tube to this exit.
10.7 M
AINS
A
DAPTOR
Use the power cable which was delivered with the detector to connect the instrument to the
power supply. Make sure that the correct voltage is selected before connecting to the mains.
To high voltage will damage the instrument.
10.8 F
USES
Next to the mains plug you c
an find the instrument’s fuses. The type of this fuse depends
on the voltage the instrument is operated.
220 V:
2 x 500 mA, slow
110 V:
2 x 1000 mA, slow
Inside the housing is an additional internal fuse (1 x 500 mA, slow).
