Local control
Page 5-4
BASE-2-02.05
4. The whole production process is now being done completely automatically.
Depending on your machine’s program :
- The product keys can be repressed as often as you wish - the same goes for pre-
selection or mixed operation.
- Other texts are possible in the display messages ( malfunction message ).
Push button
-and the preselection or mixed operation may be blocked. You cannot
cancel preselected products when the machine is operated with an accounting system.
CAUTION :
Improper use can result in scalding!
5.2.2.1 Prepare coffee products by the second level
If the second level is installed on the Euroca-2 and is released, the product keys can be
selected for two different products
Level 1: Normal application. See Section 5.2.2.
Level 2: As follows
1. Place cup under coffee delivery spout ( The spout height can be adapted to the cup).
2.
= Press shift key.
3. Press required product key.
4. The LED of the selected key lights up red and in the display appears:
5. The coffee is freshly prepared automatically and is delivered.
Depending on the programming:
-
the keys can be optionally repeated and can be selected for mixing.
-
other texts are possible in the display messages ( malfunction message ).
Coffee and hot water are simultaneously ready for drawing.
By pressing the
key preselected products are deleted (only if no accounting is active).
If the
key is pressed for more than two seconds, then all active products are
interrupted (Coffeeproducts can producted only draving brewphase).
CAUTION
:
with improper operation there is a danger of scalding.
5.2.3. Caffeine-free coffee
5.2.3.1. Prepare caffeine-free coffee manually
The Euroca-2 has to be manually prepared for caffeine-free, released ex works or by the
service technician.
1. Place cup under the coffee delivery spout. ( The spout height can be adapted to the cup.
2. Press
key.
3. Press the relevant programmed coffee product key:
On the display appears:
ª
select product
choise 1 supply 1
select product
coffee powder
select product
choise 1 supply 1
Содержание Euroca 2
