Schaerer Euroca 2, Руководство пользователя

Страница: 28 / 99

Indicating- and operating elements
Page 3-8 BASSE-2-02.03
There is a malfunction in the automatic coffee powder portioner (obtainable as option).
)
Call your customer service !
With appropriate programming (forced cleaning) 50 more coffees can be drawn or
1 more hour of coffee before delivery is blocked and the machine must be cleaned.
Product key is locked. (Keyblock or not programmed)
Product key is locked.
Option of automatic steam cut-off. Steam can continue to be drawn via the time-
out.
)
Call your customer service !
Execute machine cleaning. Product delivery possible again.
With the appropriate programming (forced cleaning ) 50 more coffees can be
drawn until delivery is blocked and the machine must be cleaned.
)
Call your customer service !
An error has occured in the programming of product keys or in the general system
data. If in addition a product key is illuminated, it might be possible that you cannot
use the same anymore. Press the
-button in order to continue working.
)
Call your customer service !
The installed water filter needs to be cleaned, refilled or replaced.
)
Call your customer service !
The message occurs when the optional milk monitoring is fitted and is released.
Dispensing of product possible when released
Dispensing of product not possible when blocked.
3.3.6 Chip card error messages
The following indications on the display inform you about operating errors with chip
cards:
The card has not been inserted correctly (see arrows) or is defective.
The Euroca-2 requires a different card type in the current menu.
A MONEY card has been inserted for the first time or the credit is 0.00.
The MONEY card is not logged in. A credit must be loaded onto the MONEY card
with the LOAD card, and/or must be logged in.
No accounting system is installed.
The data were not correctly stored on transmission from machine
Î
SAVE card.
The card was taken out of the card reader too soon. The data could not be
completely transmitted or they are defective.
Repeat the data save.
The data were not correctly stored on transmission from SAVE card
Î
machine.
The card was taken out of the card reader too soon. The data could not be
completely transmitted or they are defective.
Repeat the data save
Î
Press -key, wait five seconds and repeat the data save.
ª
select product
flowmeter defect
select product
change of filter
*read error
remove card
*write error
remove card
product-data error
system data error!
Product -
T
5 Error!
Press any key...
*wrong card
remove card
credit system
button locked
Select product
pulseswitch defective
select product
clean machine
select product
button locked
select product
temp.sensor outside
select product
milk empty