Schaerer Euroca 2, Руководство пользователя

Страница: 65 / 99

Local control
BASE-2-02.05 Page 5-33
5.7.1.14. Change PIN code
1. Push PROGRAM card into the card reader.
2. Press or
keys till menu:
3. Press key.
4. Press
key.
5. 5. With the and keys enter first digit of the new PIN code.
6. 6. With key confirm.
7. 7. Repeat steps 5 and 6 for each further digit, until PIN code has been completely
entered.
8. 8. Press or keys to reach the next menu,
draw out CHEF card normal operational readiness.
‹
With the key already set values can be taken over.
‹
PIN code only active with appropriate programming.
‹
Current PIN code is not displayed.
‹
In event of false entries, repeat steps 3 to 7.
5.7.2. KEY BLOCK card
With the KEY BLOCK card product keys can be blocked, and blocked keys can be
released again.
5.7.2.1. Menu overview
-
- Block keys
- - Release keys
5.7.2.2. Block keys
1. Push KEY BLOCK card into the card reader.
2. All released product keys light up red:
3. Press product key, which is to be blocked. The lamp of the relevant key goes out.
4. Draw out KEY BLOCK card. The required product key is now blocked.
‹
Block all product keys
Î
Press key.
‹
Also several keys can be blocked in one procedure. (Display-LED light up).
‹
Non-programmed keys do not light up when the KEY BLOCK card is inserted and
cannot be blocked / release.
button locked
select product
change PIN code
execute ' Decaf '
change PIN code
execute ' Decaf '
PIN-code 0000
` +/- ` ` Decaf `